cRPG
cRPG => General Discussion => Topic started by: Aldurath on June 03, 2011, 10:19:01 pm
-
Any suggestions on a good shield to heirloom for someone going into a 1h build?
-
Mine personally for TANK!, is heavy board shield, or you can go a HEAVEH TANK! and hierloom steel shield ;)
-
Yeah, but don't think about swinging back on any good players with those two :P
I'd suggest Heavy Kite Shield or Heavy Heater Shield. Decent speed and hitpoints.
-
Thanks guys. I waffling between going straight tank and using the steel shield and going with a heavy kite. I currently am using the heavy kite as a gen1, and am planning on going for a 12/24 spec to get some speed (I did not set up this first generation properly, I split between spear and 1h and got some riding that I never use).
-
Basic Heavy Kite can take about 5 straight hits from the big polearm axes.
Steel about 7 or 8.
If you got still some grinding to do for lvl 31, I'd suggest you try a faster shield for some time and then switch to a slower one. And so on and on. You'll find out, which one you like.
-
Heater shield is the best shield. It also comes with a hot paint job and custom rips, just like Abercrombie & Fitch jeans.
-
Depends really, what you do as 1h.
If you have an alternate weapon, take 1 slot shield. If you got enough slots, why not take a huscarl? Can take some hits, and the size is awesome for shieldwalls. If you see any bonus against shield weapons, just put it away.