cRPG

cRPG => Beginner's Help and Guides => Topic started by: MlotekPL on March 14, 2013, 12:34:04 am

Title: wpf to crossbow?
Post by: MlotekPL on March 14, 2013, 12:34:04 am

Hey
165 wpf 1h / 86 wpf crossbow or 175 1h ?  :D

Title: Re: wpf to crossbow?
Post by: Lennu on March 14, 2013, 12:36:35 am

Crossbows are pretty much useless if you don't have wpf in them. Put at least 140 wpf in xbows and start scoring some headshots  :wink:

Title: Re: wpf to crossbow?
Post by: Vodner on March 14, 2013, 12:46:30 am

I found 100 crossbow WPF to be usable, but you will miss a lot of shots you otherwise would have landed.

Title: Re: wpf to crossbow?
Post by: MlotekPL on March 14, 2013, 12:48:04 am

Thank you guys,but i can put 86 wpf maximum and next level (33)

Title: Re: wpf to crossbow?
Post by: Vodner on March 14, 2013, 12:53:34 am

Not sure. I would recommend making an STF with 86 WPF, and seeing if the accuracy is enough for you.

Title: Re: wpf to crossbow?
Post by: Malaclypse on March 14, 2013, 12:55:04 am

Quote from: Vodner on March 14, 2013, 12:53:34 am

Not sure. I would recommend making an STF with 86 WPF, and seeing if the accuracy is enough for you.

This. The difference between 0-50 and 50-100 is definitely noticeable. Try out 86 on a STF.

Title: Re: wpf to crossbow?
Post by: Ronin on March 14, 2013, 12:00:41 pm

Use a crossbow with 1 wpf. It'll repair like hell, but you can use it like a shotgun :mrgreen:

Title: Re: wpf to crossbow?
Post by: MlotekPL on March 14, 2013, 02:02:27 pm

I did ,And difference is very noticeable.i tested  150 also but difference is not great than 0-86
Thanks again guys