cRPG
cRPG => cRPG Technical problems => Topic started by: Lactose_the_intolerant on June 05, 2012, 08:57:58 pm
-
everything in title! everyone is crazy about the new server, but it isnt in my server list...
-
You are not the only one.
Same problem for me and some others.
-
same for me
-
Just noticed there was a 200 slot server. Couldn't find any of the official server since 2 days.
-
Has anyone found a solution?
Opening the port 7240 didnt work for me.
-
No solution found yet as far as I can tell you. Meow told me to keep refreshing but it didn't help. What's about the port 7240?
-
Nothing? It's the default port used by Warband servers, but EU1 uses 7140. In any case it's a server-side port, so it's of no use to you.
-
Cmpx, do you have any other idea why some people cant see the new server ?
-
I have this problem but I fix it by adding it to my Favorites then if it doesn't show I refresh my favorites and it appears.
If that doesn't work just try refreshing the internet search that might work :)
-
I have refreshed the browser a lot, but i did never see the new server, so i cant add him to my favs :/
-
Did you wait for a long time (i.e. until the label on the upper left goes away)? The server gets restarted often, so it will appear towards the end.
-
Yeah, you have to wait a few seconds before it will show up. If it still doesn't then that's just odd :shock:
-
Did you wait for a long time (i.e. until the label on the upper left goes away)?
Yes, i did wait till the search is finished. I see Eu_2, 3, 4, 5, 7 and all the other crpg servers, but not the new eu_1
-
Yes, i did wait till the search is finished. I see Eu_2, 3, 4, 5, 7 and all the other crpg servers, but not the new eu_1
same for me
-
Right now it's down.
Rule of thumb: if EU1 is up EU1_New isn't and vice versa.
-
I thought I've read before, if putting EU_1 in favourite list then EU_1_new is in as well if changed. At least that's true for me. :)
-
same as me...
-
Just tried it with the laptop of my gf (over the same router) and the server is there :shock:
The laptop has vista and my pc has winxp.
To all the other guys, which can not see eu1:
Which OS do you use ?
-
windows 7 here
-
xp here..
-
If you don't see the server, execute the following in a command line prompt (Start\Run..., type cmd and click on OK):
netsh interface ipv4 show interfaces
You'll see something like:
Idx Met MTU State Name
--- ---------- ---------- ------------ ---------------------------
1 50 4294967295 connected Loopback Pseudo-Interface 1
13 20 1500 connected Local Area Connection
If you know which one is the connection you're using tell me the MTU value, else just paste the whole thing.
-
If you don't see the server, execute the following in a command line prompt (Start\Run...):
You'll see something like:
If you know which one is the connection you're using tell me the MTU value, else just paste the whole thing.
I did this, but the window disappaers so fast, i cant read or copy anything.
-
why the ping is so high now when you changed server host? My normal ping was like 55 but now after new server host i get 93 Ping ... this sucks a lot :(
-
I did this, but the window disappaers so fast, i cant read or copy anything.
My bad, failed to explain. You have to run cmd first, not that command.
-
I found the solution (for me atleast).
I had hamachi and tungle installed (you can see them in your network connection list). I deinstalled both, made a restart and the server is there now.
P.S.:
If that doesnt work or you dont have hamachi, tungle or any other virtual network installed, you can try to reset your tcp/ip settings.
I tried this before i deinstalled the two programs, but this alone didnt help.
Here is a a short guide how you can do this (for xp, 2003 and vista):
http://www.mydigitallife.info/reinstall-and-reset-tcpip-internet-protocol-in-windows-vista-2003-and-xp/ (http://www.mydigitallife.info/reinstall-and-reset-tcpip-internet-protocol-in-windows-vista-2003-and-xp/)
-
as i sadly look at my server list without eu 1 new it started to refresh by itself and there it appeared!!!
(got it in favorites cuz i cant see it in the serv list)
-
Just disabling hamachi seemed to work for me.
-
If you know which one is the connection you're using tell me the MTU value, else just paste the whole thing.
Cant find it on W7 and got this when I entered=
visitors can't see pics , please register or login
-
Idx Met MTU State Name
--- ---------- ---------- ------------ ---------------------------
1 50 4294967295 connected Loopback Pseudo-Interface 1
11 25 1500 connected Drahtlosnetzwerkverbindung
13 5 1500 disconnected Drahtlosnetzwerkverbindung 2
10 5 1500 disconnected LAN-Verbindung
Edit: Uninstalled Hamachi (before posting this so post was bit pointless since I didn't check first). When I started server search eu_1 new was immediately found. Seems a program is blocking it.
-
i had the same prob, i fixed it by going in my center of connection-> modify card setting-> turn off all connection except the local connection.
-
ahhh thanks Werfried :D
i had tunngle and hamachi too and i just deactivated them and now there are the servers :mrgreen: